Common CRT TV Power Supply Issues and How to Fix Them

Introduction

CRT TVs, although largely replaced by modern LCD and LED screens, are still used in many households. CRT TV power supply issues One of the most common issues with CRT televisions is power supply failure. In this guide, we’ll explore the common causes of power-related issues in CRT TVs and how to fix them.

1. No Power or Dead TV
If your CRT TV doesn’t turn on, check the following:

• Power Cord & Plug – Ensure the power cord is properly connected and not damaged.
• Fuse Check – A blown fuse in the power supply section can prevent the TV from turning on.
• Main Power Transistor Failure – Check for a shorted horizontal output transistor (HOT).
• Power Supply Board Issues – Inspect for burnt components or damaged capacitors.

Solution:

• Replace any blown fuses with the correct rating.
• Test and replace the HOT if found faulty.
• seo Check and replace faulty capacitors and resistors in the power circuit.

2. TV Turns On but No Display
A CRT TV that powers on but has no display could indicate:

• High Voltage Section Failure – The flyback transformer might be defective.
• G2 Voltage Drop – This can result from a faulty flyback transformer or bad solder joints.
• Filament Circuit Issues – If the filament is not glowing, the heater circuit could be damaged.

Solution:

• Test the flyback transformer and replace if necessary.
• Reflow solder joints in the high voltage section.
• Check and replace the heater circuit components.

3. TV Powers On and Off Automatically
A CRT TV that keeps shutting down might have:

• Overheating Issues – A faulty flyback transformer can cause overheating.
• Short Circuit Detection – The power supply may be detecting a short circuit and shutting down.
• Dry Solder Joints – Loose connections can lead to power fluctuations.

Solution:

• Identify and replace overheating components.
• Test the board for short circuits and repair them.
• Re-solder any dry or cracked joints.

4. Horizontal or Vertical Lines on Screen
If your CRT TV displays lines instead of a full picture:

• Vertical Deflection Circuit Failure – A defective vertical IC can cause horizontal lines.
• Horizontal Deflection Problems – If vertical lines appear, the horizontal output circuit may be faulty.
• Bad Capacitors – Weak or bulging capacitors in the deflection circuit can lead to display problems.

Solution:

• Replace the faulty vertical or horizontal IC.
• Test and replace damaged capacitors.
• Check the yoke coil connections.

5. TV Produces Clicking Sounds but Won’t Turn On
Clicking sounds in a CRT TV often point to:

• Shorted Flyback Transformer – A faulty flyback transformer may cause repeated clicking.
• High Voltage Shutdown – The TV detects an issue and prevents power-up.
• Damaged Diodes or Rectifiers – Short-circuited components in the power supply.

Solution:

• Test and replace the flyback transformer if needed.
• Inspect and replace damaged diodes or rectifier components.
• Ensure proper voltage regulation in the power supply circuit.

Conclusion
CRT TVs can last for many years if maintained properly. CRT TV power supply issues Understanding and diagnosing power-related issues can save you money on repairs and extend the life of your television. Always take safety precautions when working with high-voltage components. CRT TV power supply issues If unsure, seek help from a professional technician.

For more CRT TV power supply issues troubleshooting tips, check out this Wikipedia article on CRT TVs.

---

Internal Other Problems Link :

• how to fix CRT TV Screen Shrinking and Expanding
• CRT TV Distorted Picture? Ultimate Troubleshooting Guide for Quick Fixes!
• CRT TV Color Issues: Fixing Red, Green, Blue Problems
• How to Fix CRT TV No Display or Black Screen Issues.

CRT TV power supply issues if want other information please comments below!